دسترسی یکساله به بیش از ۵۰۰ ژورنال روز جهان موجود در سامانه
-
http://medilib.ir
- ﻣﺪﺕ ﺯﻣﺎﻥ : 365 ﺭﻭﺯ
قیمت : 3,800,000 تومان- قیمت ویژه : 1,900,000تومان
Oral health-related quality of life (OHRQoL) after rehabilitation with removable partial dentures (RPDs): A systematic review and meta-analysis
Elaine Kar Man Choong a,b, Xin Shu a, Katherine Chiu Man Leung a, Edward Chin Man Lo
doi : 10.1016/j.jdent.2022.104351
Volume 127, December 2022, 104351
Global prevalence of edentulism and dental caries in middle-aged and elderly persons: A systematic review and meta-analysis
R. Borg-Bartolo a,1, A. Roccuzzo a,b,1, P. Molinero-Mourelle c, M. Schimmel c,d, K. Gambetta-Tessini e, A. Chaurasia f, R.B. Koca-Ãœnsal g, C. Tennert a, R. Giacaman e, G. Campus
doi : 10.1016/j.jdent.2022.104335
Volume 127, December 2022, 104335
Clinical outcomes of single crown and 3-unit bi-layered zirconia-based fixed dental prostheses: An upto 6- year retrospective clinical study: Clinical outcomes of zirconia FDPs
Reem Alfadhli a, Yara Alshammari a, Mirza Rustum Baig b,*, Ridwaan Omar
doi : 10.1016/j.jdent.2022.104321
Volume 127, December 2022, 104321
The effect of magnetic resonance imaging on mercury release from dental amalgam at 3T and 7T
James R. Allison a,b,c,*, Karthik Chary c,d, Chris Ottley e, Quoc C. Vuong f, Matthew J. German a,c,Justin Durham a,b, Peter Thelwall c,d
doi : 10.1016/j.jdent.2022.104322
Volume 127, December 2022, 104322
Comparison of collagen features of distinct types of caries-affected dentin
Adriana Bona Matos a,b,*, Mariana Reis a,d, Yvette Alania a,d, Christine D. Wu c, Wei Li c,Ana K. Bedran-Russo a,d
doi : 10.1016/j.jdent.2022.104310
Volume 127, December 2022, 104310
The influence of finishing lines and margin location on enamel and dentin removal for indirect partial restorations: A micro-CT quantitative evaluation
Edoardo Mancuso a, Claudia Mazzitelli a, Tatjana Maravic a, Jo ̃ao Pitta b, Alessandro Mengozzi a,Allegra Comba c, Andrea Baldi c, Nicola Scotti c, Annalisa Mazzoni a, Vincent Fehmer b,Irena Sailer b, Lorenzo Breschi a,*
doi : 10.1016/j.jdent.2022.104334
Volume 127, December 2022, 104334
Development of functional fillers as a self-healing system for dental resin composite
Andressa Goicochea Moreira a, Carlos Enrique Cuevas-Su �arez b, Juliana Silva Ribeiro c,Julianne Bartz Maass a, Evandro Piva a, Rafael Ratto de Moraes a, Marco C?cero Bottino d,Giana da Silveira Lima a,*
doi : 10.1016/j.jdent.2022.104313
Volume 127, December 2022, 104313
Microbiological models for accelerated development of secondary caries in vitro
Andrei C. Ionescu a,*, Sebastian Hahnel b,c, Paolo Delvecchio d, Nicoleta Ilie e,Marioara Moldovan f, Vanessa Zambelli d, Giacomo Bellani d, Eugenio Brambilla
doi : 10.1016/j.jdent.2022.104333
Volume 127, December 2022, 104333
Time efficiency and efficacy of a centralized computer-aided-design/computer-aided-manufacturing workflow for implant crown fabrication: A prospective controlled clinical study
S. Mühlemann a,*, S.T. Lamperti a, L. Stucki a, C.H.F. H ̈ammerle a, D.S. Thoma a,b
doi : 10.1016/j.jdent.2022.104332
Volume 127, December 2022, 104332
Surface characterization of indirect restorative materials submitted to different etching protocols
GlÃvia Queiroz-Lima a, Henrico Badaoui Strazzi-Sahyon b, Ana Teresa Maluly-Proni b, TicianeCestari Fagundes a, Andr ?e Luiz Fraga Briso a, Wirley Gonçalves Assunç ?ao b, JulianaAparecida Delben c, Paulo Henrique Dos Santos b,*
doi : 10.1016/j.jdent.2022.104348
Volume 127, December 2022, 104348
The impact of priming on dentally induced social judgements: An experimental study
Sadhvi Shankar Subramanian a,*, Koula Asimakopoulou b, Tim Newton b, Anita Chopra c,Wen Luo c, Andrew Joiner c
doi : 10.1016/j.jdent.2022.104347
Volume 127, December 2022, 104347
To ascertain the effects of priming to consider tooth appearance (i.e. exposure to a ‘tooth whitening television advert’) versus control (a ‘non-dental’ television advert) on social judgements of tooth colour in a group of Caucasians.
A 58S bioactive glass for dentin hypersensitivity and erosive tooth wear: An in vitro study
Itallo EmÃdio Lira Viana a, Roger Borges b, Juliana Marchi b, Sabrina Feitosa c, M Ì�arcia Martins Marques d, Ta?s Scaramucci a
doi : 10.1016/j.jdent.2022.104343
Volume 127, December 2022, 104343
To assess the effect of an experimental 58S bioactive glass on dentin permeability (dP) and erosive tooth wear (dentin surface loss - dSL).
RoBDEMAT: A risk of bias tool and guideline to support reporting of pre-clinical dental materials research and assessment of systematic reviews
Ant �onio HS Delgado a,b,*, Salvatore Sauro c, Adriano F. Lima d, Alessandro D. Loguercio e,Alvaro Della Bona f, Annalisa Mazzoni g, Fabricio Mezzomo Collares h, Frode Staxrud i,Jack Ferracane j, James Tsoi k, Julia Amato l, Klaus W. Neuhaus l,m, Laura Ceballos n,Lorenzo Breschi g, Matthias Hannig o, Mary Anne Melo p, Mutlu ?Ozcan q, Nicola Scotti r,Niek Opdam s, Satoshi Yamaguchi t, Sebastian Paris u, Lezize Sebnem Turkun v,Sophie Dom ?ejean w, Vinicius Rosa x,y, William Palin z, Falk Schwendicke aa
doi : 10.1016/j.jdent.2022.104350
Volume 127, December 2022, 104350
To develop a risk of bias tool for pre-clinical dental materials research studies that aims to support reporting of future investigations and improve assessment in systematic reviews.
The early wear susceptibility of cementum, enamel and dentine in vitro
M. Al Shammari a, A. Helmi a, S. Jadeja a, D. Bartlett a, S. O’Toole a,b,*
doi : 10.1016/j.jdent.2022.104339
Volume 127, December 2022, 104339
To assess the differential early wear susceptibility of cementum, enamel and dentine at a micron level.
The impact of implant-retained overdentures on type-2 diabetic and non-diabetic edentulous patients: Satisfaction and quality of life in a prospective cohort study
Frances Herrero a, Raphael F. de Souza b, Jocelyne S. Feine b, Peggy P. Alexander c,Adriana Vargas Green c, Thomas W. Oates a,*
doi : 10.1016/j.jdent.2022.104357
Volume 127, December 2022, 104357
To evaluate the benefits of implant therapy for patients with diabetes, we compared (i) healthy, (ii) well controlled T2DM and (iii) poorly controlled T2DM patients, in terms of oral health-related quality of life (OHRQoL) and satisfaction with mandibular 2-implant overdentures over 12 months following restoration.
Wear behaviour of direct composite restorations in tooth wear patients: a 5-year clinical study
Ke Ning a, Ewald Bronkhorst b, Luuk Crins b, Wicher van der Meer c,d, Tatiana Pereira-Cenci b,Fang Yang a, Sander Leeuwenburgh a, Bas Loomans b,*
doi : 10.1016/j.jdent.2022.104354
Volume 127, December 2022, 104354
This study aimed to investigate the wear behaviour of direct composite restorations after 5 years and associated patient factors.
Impact of the extension of the anterior-posterior spread on quality of life and satisfaction of patients treated with implant-retained mandibular overdentures - a randomized clinical trial
Rangel Lidani *, Gabriela P. Sabatini, Tarla T.O. Santos, Franciele Floriani, Analucia G. Philippi,Luis Andr ?e Mezzomo
doi : 10.1016/j.jdent.2022.104346
Volume 127, December 2022, 104346
To compare the degree of satisfaction (SD) and the impact on oral health-related quality of life (OHRQoL) of edentulous patients treated with conventional complete dentures (CCDs) and mandibular overdentures (IODs) with a short anteroposterior spread (S-APS) or a large antero-posterior spread (L-APS).
In vivo evaluation of the reliability and validity of three digital occlusion analysis methods
Qing Wang a,1, Zhe Zhao a,1, Ming Zhou a, Xiuli Zheng a, Na An a, Lina Niu a, Franklin R. Tay b,*,Chufan Ma c,*, Fu Wang a,*
doi : 10.1016/j.jdent.2022.104355
Volume 127, December 2022, 104355
The reliability and validity of three digital occlusion analysis methods was evaluated in vivo.
Presence of microbrush remnants on the adhesion surface: A microscopical analysis
Federico Berton a,*, Antonio Rapani a, Matteo Zotti a, Claudio Stacchi a, Tiziano Berton b,Davide Porrelli a,1
doi : 10.1016/j.jdent.2022.104320
Volume 127, December 2022, 104320
the aim of this ex vivo report was to evaluate, on a microscopical analysis, the presence of microbrush remnants on in the adhesive surface in extracted teeth.
Anti-inflammatory properties of S53P4 bioactive glass implant material
Fadi N. Barrak a,b,1, Siwei Li a,b,1, Ali A. Mohammed c, Connor Myant c, Julian R. Jones a,*
doi : 10.1016/j.jdent.2022.104296
Volume 127, December 2022, 104296
To assess whether the dissolution products of S53P4 bioactive glass (BG) affect cellular response of macrophages and clinically relevant peri‑implant cell populations to dental implant particles in vitro. Cells chosen were human gingival fibroblasts (HGFs), osteoblasts and bone marrow derived stromal cells (HBMSCs).
Survival time of post and cores after recementation: A 16-year retrospective study with special focus on loss of retention
Jonas Adrian Helmut Vogler *, Moritz Lehmann, Maximillane Amelie Schlenz, Karina Zierden,Peter Rehmann, Bernd W ?ostmann
doi : 10.1016/j.jdent.2022.104314
Volume 127, December 2022, 104314
Numerous studies investigating the survival time of post and cores have found that loss of retention is the most common cause of failure Nevertheless, investigations focusing on decementation, survival after recementation, and the influencing parameters in a large number of patients with long follow-up periods are lacking. Therefore, the aim of this short communication article is the survival analysis of post and cores after recementation and repeated loss of retention.
Artificial intelligence for sustainable oral healthcare
Maxime Ducret a,b,c,*, Carl-Maria M ̈orch d, Teodora Karteva e, Julian Fisher f, Falk Schwendicke f
doi : 10.1016/j.jdent.2022.104344
Volume 127, December 2022, 104344
Oral health is grounded in the United National (UN) 2030 Agenda for Sustainable Developement and its 17 Goals (SDGs), in particular SDG 3 (Ensure healthy lives and promote well-being for all at all ages). The World Health Organization (WHO) Global Strategy on Oral Health calls for prioritizing environmentally sustainable and less invasive oral health care, and planetary health. Artificial Intelligence (AI) has the potential to power the next generation of oral health services and care, however its relationship with the broader UN and WHO concepts of sustainability remains poorly defined and articulated. We review the double-edged relationships between AI and oral health, to suggest actions that promote a sustainable deployment of AI for oral health.
Influence of cone beam computed tomography on endodontic treatment planning: A systematic review
Kai-Xian Tay a,b, Li Zhen Lim c,*, Benny Kwee Chien Goh b, Victoria Soo Hoon Yu b
doi : 10.1016/j.jdent.2022.104353
Volume 127, December 2022, 104353
The aim of this systematic review was to evaluate how treatment plans changed when cone beam computed tomography (CBCT) imaging was used in endodontic treatment decision-making.
Accuracy of RGB-D camera-based and stereophotogrammetric facial scanners: a comparative study
Fangwei Pan a,1, Jialing Liu b,1, Yueyan Cen c, Ye Chen c, Ruilie Cai d, Zhihe Zhao b, Wen Liao b,*,Jian Wang a,*
doi : 10.1016/j.jdent.2022.104302
Volume 127, December 2022, 104302
This study aimed to evaluate and compare the accuracy and inter-operator reliability of a low-cost red-green-blue-depth (RGB-D) camera-based facial scanner (Bellus3D Arc7) with a stereophotogrammetry facial scanner (3dMD) and to explore the possibility of the former as a clinical substitute for the latter.
Custom-made computer-aided-design/ computer-assisted-manufacturing (CAD/CAM) synthetic bone grafts for alveolar ridge augmentation: A retrospective clinical study with 3 years of follow-up
Carlo Mangano a,*, Giuseppe Luongo b, Fabrizia Luongo b, Henriette Lerner c, Bidzina Margiani d,Oleg Admakin d, Francesco Mangano
doi : 10.1016/j.jdent.2022.104323
Volume 127, December 2022, 104323
To report on the results obtained with computer-aided-design/ computer-assisted-manufacturing (CAD/CAM) custom-made synthetic hydroxyapatite/beta-tricalcium-phosphate (HA/beta-TCP) bone grafts in alveolar ridge augmentation for dental implant placement.
Influence of the surface humidity, implant angulation, and interimplant distance on the accuracy and scanning time of complete-arch implant scans
Miguel G Ì�omez-Polo a, RocÃo Ortega b, Alessandro Sallorenzo c, Rub Ì�en AgustÃn-Panadero d,Abdul B. Barmak e, John C. Kois f, Marta Revilla-Le ?on g,*
doi : 10.1016/j.jdent.2022.104307
Volume 127, December 2022, 104307
To assess the influence of implant angulation, humidity, and interimplant distance on the accuracy and scanning time of complete-arch implant scans.
Digital photometric analysis of gingival response to periodontal treatment
Ofir Ginesin a,*, Hadar Zigdon-Giladi b, Eran Gabay a, Eli Eliahu Machtei c, Eitan Mijiritsky d,Yaniv Mayer a
doi : 10.1016/j.jdent.2022.104331
Volume 127, December 2022, 104331
The color is a major factor in determining inflammation status in most gingival indices. Current indices have limitations mainly due to subjective nature. Digital color analysis can provide objective and accurate measurements. Thus, the present study aimed to assess by digital tool the gingival color in the different stages of an active periodontal treatment.
Guided implant surgery with R2Gate®: A multicenter retrospective clinical study with 1 year of follow-up
Segin Chandran a, Laurent Sers b, Guido Picciocchi c, Fabrizia Luongo d, Henriette Lerner e,Marcus Engelschalk f, Sam Omar g,h,*
doi : 10.1016/j.jdent.2022.104349
Volume 127, December 2022, 104349
To present the results obtained with a novel sleeveless and keyless guided implant surgery system.
Temporomandibular joint segmentation in MRI images using deep learning
Mengxun Li a,d, Kumaradevan Punithakumar b, Paul W Major a, Lawrence H Le a,b,c,Kim-Cuong T Nguyen b,c, Camila Pacheco-Pereira a, Neelambar R Kaipatur a, Brian Nebbe a,Jacob L Jaremko b,#, Fabiana T Almeida a,#,*
doi : 10.1016/j.jdent.2022.104345
Volume 127, December 2022, 104345
Temporomandibular joint (TMJ) internal derangements (ID) represent the most prevalent temporomandibular joint disorder (TMD) in the population and its diagnosis typically relies on magnetic resonance imaging (MRI). TMJ articular discs in MRIs usually suffer from low resolution and contrast, and it is difficult to identify them. In this study, we applied two convolutional neural networks (CNN) to delineate mandibular condyle, articular eminence, and TMJ disc in MRI images.
The trueness of an intraoral scanner in scanning different post space depths
Bahar Elter a,*, Burcu Diker b, ̈Onjen Tak c
doi : 10.1016/j.jdent.2022.104352
Volume 127, December 2022, 104352
The purpose of this in vitro study was to evaluate the trueness of scanning the post space up to 20 mm with an intraoral scanner (IOS).
In vitro scan accuracy and time efficiency in various implant-supported fixed partial denture situations
Samir Abou-Ayash a,*, Amber Mathey a,1, Fabio G ̈aumann a,1, Ayse Mathey a,Mustafa Borga Donmez a,b, Burak Yilmaz a,c,d
doi : 10.1016/j.jdent.2022.104358
Volume 127, December 2022, 104358
To compare the accuracy and time efficiency of different digital workflows in 3 implant-supported fixed partial denture situations.
Corrigendum to ‘Twenty-four months in vivo wear of enamel antagonists to lithium disilicate implant crowns – a pilot study’ [Journal of Dentistry 124C (2022) 104215]
Annabelle von der Stück a,*, Stefan Raith b, Sven Reich a
doi : 10.1016/j.jdent.2022.104360
Volume 127, December 2022, 104360
