دسترسی یکساله به بیش از ۵۰۰ ژورنال روز جهان موجود در سامانه
-
http://medilib.ir
- ﻣﺪﺕ ﺯﻣﺎﻥ : 365 ﺭﻭﺯ
قیمت : 30,000,000 تومان- قیمت ویژه : 8,250,000تومان
دسترسی یکماهه به بیش از ۵۰۰ ژورنال روز جهان موجود در سامانه
-
http://medilib.ir
- ﻣﺪﺕ ﺯﻣﺎﻥ : 31 ﺭﻭﺯ
قیمت : 3,000,000 تومان- قیمت ویژه : 1,250,000تومان
Editorial Review Board
doi : 10.1016/S0022-3913(25)00593-1
Volume 134, Issue 2, August 2025, Page A1
Contemporary monolithic ceramics and “The digital dental team� Part 1
Treatment of a severely compromised endodontically treated tooth with a 2-piece premanufactured glass-fiber post: A clinical report
Graftless complete arch rehabilitation using a facial approach for enhanced bone anchorage and prosthetic outcomes: A clinical report
Three strategies of implant placement as an abutment for combined tooth-implant-supported double crown removable partial dentures: A clinical report of three patients up to 18 years
Enhancing the gingival contour of an anterior implant restoration by using a guided bone regeneration abutment
A computer-assisted endodontic access technique to remove fiber posts
A modified reverse impression technique for capturing and transferring soft-tissue information
Integrating the repeatable reference position and excursive movements of the mandible acquired using a jaw tracker into the design procedures of an occlusal device: A technique
Implementing an optical jaw tracking system to locate centric occlusion: A dental technique
The pull-through technique: A simplified clinical guide for anterior composite resin restorations
Fully guided dental implant placement by using an additively manufactured screw-retained surgical guide: A dental technique
Fully digital workflow for a CAD-CAM custom healing abutment with an optimal emergence profile: A dental technique
Digital prediction of smile line transition by using 2D photowrapping
Digitally designed occlusion of an implant-supported crown considering physiological tooth displacement under occlusal loading
Design and use of customized hand instruments for removing fractured implant abutment screws
Fabrication of a reverse-engineered custom scan body as a digital solution for recording implant position: A dental technique
Using virtual implant alignment to fabricate a combined implant-supported interim restoration and surgical guide: A dental technique
Clinical outcomes of digital scans versus conventional impressions for implant-supported fixed complete arch prostheses: A systematic review and meta-analysis
Implant-supported prostheses in patients with special needs: A systematic literature review of protocols and outcomes
Clinical outcomes of conometric retention for implant-supported fixed prostheses: A systematic review and meta-analysis
Comparing the impact of denture cleansers on the surface properties of conventional and digitally fabricated denture bases: A systematic review with meta-analysis of in vitro studies
Practical applications of robots in prosthodontics for tooth preparation and denture tooth arrangement: A scoping review
Clinical applications and outcomes of the surgical tooth extrusion technique: A bibliometric analysis from 1982 to 2023
A clinical comparison of sagittal condylar inclination and Bennett angle derived from a conventional electronic tracking device and an optical jaw tracking device
Gingival displacement before impression making: A prospective, comparative randomized clinical trial
Accuracy of additive and subtractive methods for interim tooth-supported restorations: An in vitro comparison of occlusal, axial, and intaglio surfaces
Acceptability and deviation of finish line detection and restoration contour design in single-unit crown: Comparative evaluation between 2 AI-based CAD software programs and dental laboratory technicians
Marginal discrepancy of lithium disilicate crowns made with digital and conventional technologies
Optimal design of the retainer and connector for a lithium disilicate resin-bonded fixed partial denture: A finite element analysis study
Accuracy of impression scan bodies for complete arch fixed implant-supported restorations
Development and evaluation of a noninvasive vibration modeling technique for primary stability measurement in artificial cortical bone blocks
Influence of implant internal thread deformation and repair on screw torque maintenance: An in vitro study
Influence of artificial aging on the in vitro fracture load of tooth-to-implant-supported fixed partial dentures with different retainer designs
Role of interproximal contacts in implant-supported crown stability: A finite element analysis study
Development of a peri-implantitis model in New Zealand white rabbits: A preclinical study
Can ChatGPT be trusted as a resource for a scholarly article on treatment planning implant-supported prostheses?
Retrieval of cement-retained zirconia implant-supported crowns with an Er,Cr:YSGG laser
Comparison of the accuracy of a cone beam computed tomography-based virtual mounting technique with that of the conventional mounting technique using a facebow
Impact of 3D resin and base designs on the accuracy of additively manufactured casts using a stereolithography technology
Effect of print orientation on sorption, solubility, and monomer elution of 3D printed resin restorative materials
Impact of operator experience, scanning pattern, and arch location on the time and trueness of complete denture digitization using an intraoral scanner
Effect of hatch distance on porcelain bond strength of metal frameworks produced by selective laser melting
Color stainability, fluorescence, opalescence, and surface analyses of extrinsically stained resin-matrix CAD-CAM materials after toothbrushing and thermocycling
Methods of evaluating mechanical properties of 3D printed occlusal device materials: Flexural strength, fracture toughness, and impact strength
Effect of surface treatment on the bond strength of chairside hard liners bonded to traditional and contemporary CAD-CAM denture base polymers
Utilizing orthodontic appliances to retain and disguise a pediatric maxillary obturator throughout growth
Creating and analyzing digital scans of a mandibulectomy cast with simulated trismus
Effect of in vivo aging on the surface and electrochemical properties of magnetic attachments used in facial prostheses: A retrieval analysis study
Comparison of the weight of conventionally heat-processed hollow and solid obturators and 3D printed hollow obturators
Improving facial prosthesis construction with a contactless scanning and digital workflow: A feasibility crossover randomized controlled trial of digital versus conventional manufacture of orbital and nasal prostheses
Evaluation of the use of different intraoral scanners for auricular prosthetic reconstruction
Tooth characterization of digitally fabricated complete dentures
Letter to the Editor regarding, “Influence of polymerization protocols on the physical and mechanical properties of a 3D printed resin� by Rizzante et al
Response to Letter to the Editor regarding, “Influence of polymerization protocols on the physical and mechanical properties of a 3D printed resin� by Rizzante et al
Insights into “Evaluation of accuracy of deep learning and conventional neural network algorithms in detection of dental implant type using intraoral radiographic images: A systematic review and meta-analysis�
Response to Letter to the Editor regarding “Evaluation of accuracy of deep learning and conventional neural network algorithms in detection of dental implant type using intraoral radiographic images: A systematic review and meta-analysis�
