دسترسی یکساله به بیش از ۵۰۰ ژورنال روز جهان موجود در سامانه
-
http://medilib.ir
- ﻣﺪﺕ ﺯﻣﺎﻥ : 365 ﺭﻭﺯ
قیمت : 4,800,000 تومان- قیمت ویژه : 2,400,000تومان
Providing a monolithic zirconia fixed partial denture with rigid and nonrigid connectors to overcome nonparallel abutment teeth
Implant placement with an autonomous dental implant robot: A clinical report
Dental implant placement with immersive technologies: A preliminary clinical report of augmented and mixed reality applications
An analog-digital hybrid technique for immediate dentures with idealized border extensions
Polytetrafluoroethylene tape to combat tooth sensitivity during complete mouth rehabilitation
A digital workflow for complete arch rehabilitation with zirconia crowns on restored posterior teeth and a polyetheretherketone framework denture
Use of polyvinyl siloxane to maintain peri-implant submucosal contours on removal of screw-retained implant-supported restorations
Obtaining more accurate complete arch implant digital scans with the aid of a geometric pattern: A dental technique
Digital design and fabrication of a template to prepare guiding planes in removable partial denture abutments
Fully digital workflow for retrofitting a new crown to an existing removable partial denture
Do 3D printed and milled tooth-supported complete monolithic zirconia crowns differ in accuracy and fit? A systematic review and meta-analysis of in vitro studies
Osseointegration in relation to drilling speed in the preparation of dental implants sites: A systematic review
Impact of splinting implant-supported crowns on the performance of adjacent posterior implants: A systematic review and meta-analysis
Effectiveness of immediate implant placement into defective sockets in the esthetic zone: A systematic review and meta-analysis
Are the counts of Streptococcus mutans and Staphylococcus aureus changed in complete denture wearers carrying denture stomatitis? A systematic review with meta-analyses
Does the use of conventional complete dentures influence taste perception? A systematic review
Antimicrobial properties of denture adhesives: A scoping review
Diagnostic accuracy of ultrasonography compared with magnetic resonance imaging in diagnosing disc displacement of the temporomandibular joint: A systematic review and meta-analysis
Effect of prerestorative short-term clear aligner therapy in restorative treatment planning
Comparison of clinical outcomes between single metal-ceramic and zirconia crowns
Outcomes of bio-esthetic single implant-supported restorations after peri-implant soft tissue conditioning with two prosthetic techniques: A 1-year randomized clinical trial
Investigating the effectiveness of atorvastatin mouthwash on denture stomatitis: A randomized, double-blind controlled trial
Cadiax Compact 2 and MODJAW comparative analysis of condylar inclination: Innovative digital approaches in dentistry
Effect of transcutaneous electrical nerve stimulation (TENS) on the electromyographic activity of human masticatory muscles in young people with normal occlusion
Role of gender and age in influencing dentist perceptions of effective leadership capabilities
Manufacturing accuracy of the intaglio surface of definitive resin-ceramic crowns fabricated at different print orientations by using a stereolithography printer
Fracture resistance, 3-dimensional finite element analysis, and safety factors for five post-and-core restorations with crowns placed in the noncircular-shaped canals of premolars
Comparisons of analog and digital methods to produce an accurate trial restoration
Enamel wear and fatigue resistance of 3D printed resin compared with lithium disilicate
Accuracy of static computer-aided implant surgery (S-CAIS) using CAD-CAM surgical templates fabricated from different additive manufacturing technologies
Effect of fabrication methods and number of supporting teeth on the surface accuracy and dimensional stability of implant surgical guides
Osteoblast cell behavior on polyetheretherketone dental implant surfaces treated with different grit size aluminum oxide particles: An in vitro analysis
Exploring the impact of blood and bone debris at the implant-abutment interface on peak removal torque: Bridging clinical observations with laboratory evidence
Decontaminating the surfaces of bonded screw-retained implant prostheses: A comparison of three different post-processing cleaning techniques
Acoustic resonance frequency analysis for evaluating prosthetic screw stability in splinted implant-supported fixed dental prostheses: An in vitro study
Flexural strength and mode of failure of interim implant-supported fixed dental prostheses following different conversion techniques and structural reinforcement
Fatigue behavior of implant-supported cantilevered prostheses in recently introduced CAD-CAM polymers: An in vitro study
Influence of the ambient color lighting on the accuracy of complete arch implant scans recorded by using two intraoral scanners
Effect of a calibration aid and the intraoral scanner on the registration of a partially edentulous maxilla: An in vitro study
A comparison of a handheld minicomputer and an external graphics processing unit in performing 3D intraoral scans
Trueness of 4 sectional-cast digital methods for transferring the interocclusal relationship in complete mouth rehabilitation
Use of polyvinyl siloxane impressions to monitor sub-5-μm erosive tooth wear on unpolished enamel
In vitro fracture and fatigue resistance of monolithic zirconia crowns fabricated by stereolithography
Effect of machining method and margin design on the accuracy and margin quality of monolithic zirconia crowns
Mechanical and biocompatibility testing of zirconia and lithium disilicate ceramics: An in vitro study
Surface properties and biofilm formation on resins for subtractively and additively manufactured fixed dental prostheses aged in artificial saliva: Effect of material type and surface finishing
Investigation of the mechanical properties of lavender-reinforced heat-activated polymethyl methacrylate denture base resin
Comparative analysis of polishing protocols on microhardness and surface roughness of occlusal device materials fabricated using microwave-polymerized acrylic or 3D printed resins
Computer-aided prosthetic rehabilitation of a resected maxilla after mucormycosis using a quad zygomatic implant protocol with digital planning
Comparison of trueness and repeatability of facial prosthesis design using a 3D morphable model approach, traditional computer-aided design methods, and conventional manual sculpting techniques
Antimicrobial effects of nano titanium dioxide and disinfectants on maxillofacial silicones
Denture maintenance with a custom 3-dimensionally printed denture box
Letter to the Editor regarding “Computer guided root tip extraction and implant placement: A clinical report�
Response to the Letter to the Editor regarding, “Computer guided root tip extraction and implant placement: A clinical report�
